CUBIC TCP 目前大多数Linux缺省使用的TCP流量拥塞算法 RFC8312


google bbr (Bottleneck Bandwidth and Round-trip propagation time)
google在GCP平台应用bbr TCP BBR congestion control comes to GCP
GCP-TCP-BBR-animate-r32B252812529plh0.GIF

What is BBR?
BBR ("Bottleneck Bandwidth and Round-trip propagation time") is a new congestion control algorithm developed at Google. Congestion control algorithms — running inside every computer, phone or tablet connected to a network — that decide how fast to send data.
How does a congestion control algorithm make this decision? The internet has largely used loss-based congestion control since the late 1980s, relying only on indications of lost packets as the signal to slow down. This worked well for many years, because internet switches’ and routers’ small buffers were well-matched to the low bandwidth of internet links. As a result, buffers tended to fill up and drop excess packets right at the moment when senders had really begun sending data too fast.

But loss-based congestion control is problematic in today's diverse networks:

In shallow buffers, packet loss happens before congestion. With today's high-speed, long-haul links that use commodity switches with shallow buffers, loss-based congestion control can result in abysmal throughput because it overreacts, halving the sending rate upon packet loss, even if the packet loss comes from transient traffic bursts (this kind of packet loss can be quite frequent even when the link is mostly idle).
In deep buffers, congestion happens before packet loss. At the edge of today's internet, loss-based congestion control causes the infamous “bufferbloat” problem, by repeatedly filling the deep buffers in many last-mile links and causing seconds of needless queuing delay.
We need an algorithm that responds to actual congestion, rather than packet loss. BBR tackles this with a ground-up rewrite of congestion control. We started from scratch, using a completely new paradigm: to decide how fast to send data over the network, BBR considers how fast the network is delivering data. For a given network connection, it uses recent measurements of the network's delivery rate and round-trip time to build an explicit model that includes both the maximum recent bandwidth available to that connection, and its minimum recent round-trip delay. BBR then uses this model to control both how fast it sends data and the maximum amount of data it's willing to allow in the network at any time.

找到的bbr研究BBR-Congestion-Based-Congestion-Control.pdf

标签: none

添加新评论